Summary
LQ valve actuators are the new generation of our company and can be used for driving and controlling the butterfly valves,ball valves and plug valves (part-turn valves with 90° movement).With the functions of local control and remote control both.
They are widely used in the fields such as oil,chemistry,power generation,water treatment,paper making.etc
The enclosure protection is IP67,and the explosion proof class is d II CT6(LQ1,LQ2) and d II BT6(LQ3,LQ4,LQ4JS)
Characteristics
Housing:Hard anodized Aluminum casting and external epoxy power coated against severe industrial environment.
Gearing:Precisely machined double worm gear C/W minimum black-lashjow noise,high output torque.
Self-locking:Provided double worm gearing to keep position of valve unchanged against reverse torque from valve.
Motor:Specially designed and induction motor to generate high starting torque and high efficiency equipped with thermal protector to prevent damage from over heating.Insulation class F.
External mechanical stopper:Prevents over run of travel angle when limit switch fails.
Torque switches:Protect actuator from damage caused by overload from the driven valve over the whole travel, 1 each for open/close.
Limit switches:Directly engaged with driving shaft to set accurate position of valve,supplying a dry contact signal.
Terminal:Spring loaded push type terminal for tight wiring connection under severe vibration.
Space heater:Anti-condensation.
Manual override:Auto/Manual switchable lever and handwheel engagement for emergency manual operation.Drive force automatically resorted by motor start, unless lever padlocked to prevent this occurring.
Handwheel:Manual operated .turn on-off valve directly when power off.
Electrical characteristics
Automatic identify Phase sequence, phase failure protection.
DC24V Voltage Class for remote control.
Convenient and flexible wiring method.
Selector with impenetrable design to improve the sealing of actuator.
Working situation indicated by five dry contact signals to convenient monitor the DCS system.
Monitoring relay supply comprehensive fault signal for DCS system.
Selector padlocked according to requirements to prevent the failure operation.
Item
Selection table
Item |
Output torque |
Action time （0-90℃）
|
Power supply |
Metal seal butterfly valve |
Soft seal butterfly valve |
Ball valve |
Aeration butterfly valve |
LQ0-05 | 50 | 21 | DC24V, AC110V, AC220V, AC380V, AC440V | / | ≤DN80 | ≤DN32 | ≤DN80 |
LQ1-06 | 60 | 26 | / | ≤DN80 | ≤DN32 | ≤DN80 |
LQ1-10 | 100 | 26 | DN40-DN65 | DN100-DN125 | DN40-DN50 | DN100-DN200 |
LQ2-20 | 200 | 28 | DN80-DN125 | DN150-DN200 | DN65-DN80 | DN250-DN300 |
LQ3-35 | 350 | 32 | DN125 | DN200 | DN80 | DN350 |
LQ3-50 | 500 | 32 | DN150-DN200 | DN250 | DN100-DN125 | DN350-DN500 |
LQ4-80 | 800 | 36 | DN250 | DN300 | DN150 | DN500-DN600 |
LQ4-110 | 1100 | 36 | DN250 | DN350 | DN150 | DN600-DN800 |
LQ4JS-200 | 2000 | 110 | DN300-DN400 | DN400-DN500 | DN200-DN250 | DN800-DN1000 |
LQ4JS-250 | 2500 | 110 | DN450 | DN500-DN600 | DN250 | DN1000-DN1200 |
LQ4JS-400 | 4000 | 180 | DN600 | DN700 | DN300 | DN1200 |
LQ4JS-600 | 6000 | 180 | DN600 | DN800-DN900 | DN350-DN400 | DN1500-DN1800 |
Ordering information
The following details need to be supplied by user when ordering.
Torque required(N.m),rotate speed (r/min)
Application environment
Power supply
Mounting base with valve
Electrical control required
Other special requirements.
