Summary

●LQ series electric actuator are the new generation of our company and can be used for driving and controlling the butterfty valves, ball valves and plug valves with 90° movement.

●Our products and services are widely used in industries inclusive of Oil& Gas, HVAC, Marine, Mining, Pulp& Paper, Food & Beverage, Power, Water& wasterwater, Pharmaceutical and Chemical industries around the world.

●The enclosure protection is IP67comply with d 1 BT6 or dll CT6.

Characteristics

●Control types and structure

>On-off and Modulating.

>Optionss are available for local controller providing easy operation in field such as intelligent and battery backup.

●Removable motor

>Easy to maintain as the removable squirrel caged induction motor.

●Terminal block

>Spring loaded push type terminal block for tight wiring connection under severe vibration.

>Enough number of terminal strips for customer's convenience.

●Double wormgear

>With a low noise and self-locking to keep position of valve unchanged against reverse torque from valve.

●Space heater

>Anti-condensation due to the temperature difference.

●Torque switch

>Auxiliary limit switch and torque switch to protect actuator from damage caused by overload.

●Mechanical position indicator

>Check the position of your valve at a glance, dome indicator option.

●Handwheel

>Manual override and handwheel for emergency manual operation.

●Mounting base

>Flange according to ISO521 1 standard with removable bushing.

●Multi-Enclosure

>Explosion proof, Weather proof and watertight option.

●Excellent enclosure

>Better enclosure due to less interfaces.

Item 

Selection table

Ordering information

The following details need to be supplied by user when ordering.

●Torque required(N.m),rotate speed (r/min)

●Application environment

●Power supply

●Mounting base with valve

●Electrical control required

●Other special requirements.

Technical Specification

Remarks: All range actuators are dispatched with explosion proof plugs 2-NPT 3/4 fitted into the cable entries, it is the responsibility of the installer to ensure the appropriate cable adapters and packings with explosion proof.

Dimension(mm)

Questions for ordering electric actuators and valves:

1. Voltage and control method of electric actuator

Answer: AC220V passive contact control

2. Torque required by electric actuator

3. Answer: 100Nm

4. Opening and closing time required for electric actuator

Answer: 30S

5. Flange connection of electric actuator

F03/F0511X11

6. If the whole set is purchased, what kind of valve do I need to match?

Answer: Ball valve

7. How is the valve connected?

Answer: Flange

8. What is the material of the valve body and valve seat?

Answer: SS304 valve body, PTFE rubber seal

9. What is the pressure of the valve?

Answer: 16 kg pressure

10. Electric actuator passed certificate

Answer: CE, SIL

11. The operating environment of the actuator (conventional)

Answer: Normally, -20°~60℃